ผลการค้นหา

Back End

แปลว่า(english) 1) Usually refers to the entry end of process lines. 2) The outside lap 2) of the produced coil, or the inside lap of the consumed coil.

Holding Period Period

แปลว่า(Concrete Engineering) In the manufacture of concrete products, the period between completion of casting and the introduction of additional heat or the steam curing period

Software metrics

แปลว่า(Software Engineering) quantitative measures of the process or the product

Reaeration

แปลว่า(Environmental Engineering) The dissolving of molecular oxygen from the atmosphere into the water.

Costs of the Construction Work

แปลว่าต้นทุนงานก่อสร้าง

Prototyping

แปลว่า(Software Engineering) the creation of a mock-up of an application

graphic record of the weather

แปลว่าการบันทึกความเปลี่ยนแปลงของอากาศ โดยเส้นที่แสดงการสูงต่ำ

Bearing Strength

แปลว่า(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

Brinell Hardness

แปลว่า(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

Butt end

แปลว่า(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.

Center of Gravity (CG):

แปลว่า(english) The location of the resultant of gravity forces on an object or objects: sometimes called center of mass.

Pumping (of Pavements)

แปลว่า(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.