ผลการค้นหา

Stability:

แปลว่า(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.

Composting

แปลว่า(Environmental Engineering) The controlled aerobic degradation of organic wastes into a material which can be used for landscaping, landfill cover, or soil conditioning.

Cementitious

แปลว่า(Concrete Engineering) Having cement-like, cementing, or bonding type properties. Material or substance producing bonding properties or cement-like materials.

Water-Cement Ratio

แปลว่า(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.

Pressure:

แปลว่า(english) Pressure is a similar idea to stress, the force intensity at a point, except that pressure means something acting on the surface of an object rather than within the material of the object. When discussing the pressure within a fluid, the meaning is equivalent to stress.

Inelastic:

แปลว่า(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Bit, Tool (cutter)

แปลว่า(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.

Material and Equipment Supply Bond

แปลว่าหนังสือค้ำประกันที่ผู้ผลิต หรือ ผู้จำหน่ายวัสดุหรือเครื่องจักร ให้ไว้กับเจ้าของโครงการว่าจะจัดส่งวัสดุหรือเครื่องจักรให้ตามที่ระบุไว้ในสัญญาซื้อขาย

Brazing

แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.

Pozzolan (ASTM C 618)

แปลว่า(Concrete Engineering) A siliceous, or siliceous and aluminous material, which in itself possesses little or no cementitious value but will, in a finely divided form, such as a powder or liquid and in the presence of moisture, chemically react with calcium hydroxide at ordinary temperatures to form permanent, insoluble compounds possessing cementitious properties.

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

fatigue of material

แปลว่าความล้าในวัตถุ, คือความทนทานในวัตถุเ เช่น โลหะที่ใช้งานหนักมาเป็นเวลานาน ย่อมจะเกิดความล้าข้นและจะเกิดผลเสียหายในที่สุด