ผลการค้นหา

ค้นเจอ 601 รายการ

Build Up Coil

(english) A coil made by putting together two or more coils to make one max coil or one shippable coil.

Bending Strength

(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

Strain:

(english) The intensity of deformation at a point in an object. See normal strain and shear strain.

Strength:

(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

Bench Lathe

(english) A small lathe mounted on a bench or table.

Bearing Load

(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Cement, Portland (ASTM C150) (Concrete Engineering)

A powdery substance made by burning, at a high temperature, a mixture of clay and limestone producing lumps called “clinkers” which are ground into a fine powder consisting of hydraulic calcium silicates. For non-portland cements, see aluminous cement.

Resultant:

(english) The resultant of a system of forces is a single force or moment whose magnitude, direction, and location make it statically equivalent to the system of forces.

Bath

(english) Molten metal on the hearth of a furnace, in a crucible, or in a ladle

Use-case

(Software Engineering) a written description that defines a very specific interaction between a user and a system, often (but not always) written in the form of a usage scenario

Factoring

(Software Engineering) a technique that distributes control and work in a top-down manner within a software architecture (used a part of structured analysis)

Burnishing

(english) Developing a smooth finish on a metal by tumbling or rubbing with a polished hand tool.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด