ค้นเจอ 667 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "in the raw"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Classes - a basic construct in object

(Software Engineering) oriented methods that categorizes elements of the problem

Boron Steels

(english) The addition of boron in the range 0.0005-0.005% to certain steels increases the hardenability. A range of boron steels is now listed in the current BS 970 and are widely used for the production of cold headed fastenings.

Breakout

(english) An accident caused by the failure of the walls of the hearth of the furnace resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.

Shear modulus:

(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.

Blast Furnace 2

(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.

Trophic level

(Environmental Engineering) A level in the food chain. The first trophic level consists of the primary producers, autotrophs. The second trophic level is vegetarians which consume autotrophic organisms.

Actual Weight

(english) The customer buys by the actual (scale) weight of the steel. The theoretical weight is used in estimating, however, it is not to be used for billing.

Vapor Pressure

(Concrete Engineering) The pressure exerted by a vapor that is calculated based upon relative humidity and temperature. The higher the humidity and higher temperature, in degrees Fahrenheit, the greater the vapor pressure exerted.

Ultimate disposal

(Environmental Engineering) The process of returning residuals back to the environment in a form which will have the minimal or reduced negative environmental impacts.

Bending Angle

(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Bright Annealing 2

(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.

Chemical oxygen demand (COD)

(Environmental Engineering) The amount of oxygen required to oxidize any organic matter in the water using harsh chemical conditions.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z