ผลการค้นหา

Baked Core

แปลว่า(english) A core which has been heated through sufficient time and temperature to produce the desired physical properties attainable from its oxidizing or thermal-setting binders.

joint, construction

แปลว่ารอยต่อก่อสร้าง : รอยต่อที่กำหนดไว้ในงานคอนกรีตใน 1 วัน ใช้กับอาคารขนาดใหญ่ ซึ่งต้องเทคอนกรีตจำนวนมากติดต่อกัน และระยะเวลาที่ใช้ในการเทคอนกรีตนั้นเกินกว่าระยะเวลาการแข็งตัวของคอนกรีต (initial setting time)

Reliability

แปลว่า(Software Engineering) a measure of the degree to which software operates reliably over some period of time ความเชื่อถือได้, ความไว้ใจได้ [วิศวกรรรมอุตสาหการ]; ความเชื่อถือได้ [อิเล็กทรอนิกส์, ไฟฟ้ากำลัง]

Wetland

แปลว่า(Environmental Engineering) Semi-aquatic land, that is land that is either inundated or saturated by water for varying periods of time during each year, and that supports aquatic vegetation which is specifically adapted for saturated soil conditions.

Revibration

แปลว่า(Concrete Engineering) Delayed vibration of concrete that has already been placed and consolidated. Most effective when done at the latest time a running vibrator will sink of its own weight into the concrete and make it plastic and workable again.

Biochemical oxygen demand (BOD)

แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any organic matter present in a water during a specified period of time, usually 5 days. It is an indirect measure of the amount of organic matter present in a water.

Gillmore Needle

แปลว่า(Concrete Engineering) A device used in determining time of setting of hydraulic cement, described in ASTM 0 266. Gradation The sizing of granular materials; for concrete materials, usually expressed in terms of cumulative percentages larger or smaller than each of a series of sieve openings or the percentages between certain ranges of sieve openings.

Carbonation

แปลว่า(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.