ตัวกรองผลการค้นหา
Software safety
แปลว่า(Software Engineering) an SQA activity that focuses on the identification and assessment of potential hazard that may have a negative impact on the operation of software
Moist Room
แปลว่า(Concrete Engineering) A room used for storing and curing cementitious test specimens. The atmosphere of this room is maintained at a temperature of 73.4 3.0'F or 23.0*1.7'0 and relative humidity of at least 98 percent. These facilities must be adequate to continually maintain free moisture on the exteriors of test specimens.
Go, no-go decision
แปลว่า(Software Engineering) a point at which manager or the customer decides whether the project should proceed
Detail design
แปลว่า(Software Engineering) a design activity that focuses on the creation of an algorithm
Bedding a Core
แปลว่า(english) Resting an irregularly shaped core on a bed of sand for drying.
Bench Work
แปลว่า(english) Work done primarily at a bench with hand tools. Occasionlly suplemented by small power-driven tools.
Bending Strength
แปลว่า(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.
Strain:
แปลว่า(english) The intensity of deformation at a point in an object. See normal strain and shear strain.
Ac3
แปลว่า(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.
Blast Furnace 2
แปลว่า(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.
Bottom Up
แปลว่า(english) Reversing the wrap of a coil putting the top surface on the bottom.
Blue Brittleness 2
แปลว่า(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.