ผลการค้นหา

Bearing Strength

แปลว่า(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.

Project planning

แปลว่า(Software Engineering) the activity that creates the Project Plan

Brinell Hardness

แปลว่า(english) The hardness of a metal or part, as represented by the number obtained from the ratio between the load applied on the spherical area of the impression made by a steel ball forced into the surface of the material tested.

Bottom Die

แปลว่า(english) The stationary half-die.

Bottom Roll

แปลว่า(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Software metrics

แปลว่า(Software Engineering) quantitative measures of the process or the product

Billet container

แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.

Give the right of access to the site

แปลว่าให้สิทธิในการเข้าพื้นที่ก่อสร้าง

Butt end

แปลว่า(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.

Back End

แปลว่า(english) 1) Usually refers to the entry end of process lines. 2) The outside lap 2) of the produced coil, or the inside lap of the consumed coil.

Temper

แปลว่า(Concrete Engineering) The addition of water to the cement mix whether at the batch plant, during transit or at the jobsite to achieve the specified water to cement ratio.

Chair(s)

แปลว่า(Concrete Engineering) In concrete formwork, the support for the reinforcing steel.