ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
แผ่นขับหรือแผ่นส่งกำลังของคลัทช์ (ทำงานประสานกับ driven member)
(Concrete Engineering) A quantity of cement contained in a unit volume of concrete or mortar, ordinarily expressed as pounds, barrels, or bags per cubic yard.
(Environmental Engineering) The removal of any dissolved or suspended contaminants beyond secondary treatment, often this is the removal of the nutrients nitrogen and/or phosphorus.
(Concrete Engineering) A mixture of water and hydraulic cement, both before and after setting and hardening.
( ก่อสร้าง ) ปูนซีเมนต์ที่มีส่วนผสมขี้เหล็ก จากเตาหลอมโลหะ ซึ่งเป็นซีเมนต์ด่างกับ Portland cement = ปูนซีเมนต์ชนิดดี
(english) "Fine particles of limestone (flux) and iron ore are difficult to handle and transport because of dusting and decomposition, so the powdery material usually is processed into larger pieces. The raw material's properties determine the technique that is used by mills. 1) SINTER Baked particles that stick together in roughly one-inch chunks. Normally used for iron ore dust collected from the blast furnaces. 2) PELLETS Iron ore or limestone particles are rolled into little balls in a balling drum and hardened by heat. 3) BRIQUETTES Small lumps are formed by pressing material together. Hot Iron Briquetting (HBI) is a concentrated iron ore substitute for scrap for use in electric furnaces.
(Software Engineering) the activities required to elicit, elaborate, negotiate, specify, and validate system or software requirements
(Concrete Engineering) Having cement-like, cementing, or bonding type properties. Material or substance producing bonding properties or cement-like materials.
(Environmental Engineering) Treatment which includes all operation prior to and including primary treatment, e.g., bar screening, grit removal, comminution, and primary sedimentation.
(Concrete Engineering) The ability of a material or product to reduce or eliminate gaseous transmissions through it's mass; measured as the rate of Water Vapor Transmission (WVT). Note: Not all materials that are waterproof are vaporproof; all materials that are vaporproof are inherently waterproof.
(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.
(Software Engineering) measures of quality