ผลการค้นหา

Blind Bole

แปลว่า(english) A hole made in a workpiece that does not pass through it.

Extreme programming

แปลว่า(Software Engineering) an agile process model that emphasizes scenario-based planning, incremental delivery, refactoring, pair programming and continuous testing.

Configuration items

แปลว่า(Software Engineering) the individual pieces of programs, documents and data that are controlled using SCM

Structured programming

แปลว่า(Software Engineering) a design method that limited design constructs to only three basic forms and constrains program flow for better quality

Formulation

แปลว่า(Software Engineering) a Web engineering action that identifies business need, describes WebApp objectives, defines major features and functions, and establishes mechanisms for requirements gathering

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

Centroid:

แปลว่า(english) Similar to the concept of center of gravity, except that it applies to a two dimensional shape rather than an object. For a given shape, the centroid location corresponds to the center of gravity for a thin flat plate of that shape, made from a homogeneous material.

Classes - a basic construct in object

แปลว่า(Software Engineering) oriented methods that categorizes elements of the problem

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Brittle:

แปลว่า(english) A brittle structure or material exhibits low ductility, meaning that it exhibits very little inelastic deformation before complete failure.

Brass

แปลว่า(english) An alloy that is 70% copper,30% zinc. One of the most widely used of the copper-zinc alloys; malleable and ductile; excellent cold-working but poor hot-working and machining properties; excellent for soft-soldering; good for silver alloy brazing or oxyacetylene welding, but fair for resistance or carbon-arc welding. Used for drawn cartridges, tubes, eyelets machine items and snap fasteners.

Customer

แปลว่า(Software Engineering) the person or group that has requested the software and will be paying the bill for its development