ค้นเจอ 88 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "push at"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Aldehyde

(Environmental Engineering) An organic compound with a carbonyl at one end of a hydrocarbon group.

Bridle Unit

(english) A three-roll cluster used to control line tension at strategic locations on the line.

Accm

(english) In hypereutectoid steel, the temperature at which cementite goes into complete solution with austenite.

Bander

(english) Machine located at each delivery reel to automatically place circumference bands around completed coils.

Bench Work

(english) Work done primarily at a bench with hand tools. Occasionlly suplemented by small power-driven tools.

Go, no-go decision

(Software Engineering) a point at which manager or the customer decides whether the project should proceed

Ac3

(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.

Bending Strength

(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

Strain:

(english) The intensity of deformation at a point in an object. See normal strain and shear strain.

Blue Brittleness 2

(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.

Blast Furnace 2

(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.

Adsorption

(Environmental Engineering) A surface phenomena in which a solute (soluble material) concentrates or collects at a surface (the adsorbent).


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z