ผลการค้นหา

Plastic Consistency

แปลว่า(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.

Plasticity

แปลว่า(Concrete Engineering) Property of freshly mixed concrete, cement paste or mortar which determines its ease of molding or resistance to deformation.

Rebound

แปลว่า(Concrete Engineering) Wet shotcrete or sand and cement which bounces away from a surface again at which pneumatically applied mortar is being projected.

Acetyl Tributyl Citrate

แปลว่า(english) One of the lubricating oils generally applied on tin Mill Products (tin plate, TFS-chrome/chrome oxide coated steel, and blackplate).

Belt Wrapper

แปลว่า(english) Line equipment used in the Tin Mill for starting coils on prime or reject reels. The belt wrapper ensures a proper start.

Cement Content

แปลว่า(Concrete Engineering) A quantity of cement contained in a unit volume of concrete or mortar, ordinarily expressed as pounds, barrels, or bags per cubic yard.

Entrained Air (See air entrainment)

แปลว่า(Concrete Engineering) Microscopic air bubbles intentionally incorporated in mortar or concrete, to improve workability and durability (usually imparting a higher degree of resistance to freezing and thawing).

Base Type

แปลว่า(english) Tin Mill term; Thickness divided by .00011. Also weight in pounds of one Base Box of Tin plate. In finished inventory base weight is specified instead of decimal thickness.

Z-Mill

แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

Stucco

แปลว่า(Concrete Engineering) A portland cement mortar material that can be applied to the surface of any building or structure to form a hard and durable covering for the exterior wails or other exterior surfaces.

Plastic

แปลว่า(Concrete Engineering) A condition of freshly mixed concrete. mortar or cement -paste indicating that it is workable and readily re-moldable, is cohesive, and has an ample content of fines and cement but is not over wet.

Rock Pocket

แปลว่า(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.