ผลการค้นหา

single pole cut out

แปลว่าคัทเอาท์ซึ่งทำงานเฉพาะสายตัวนำตัวเดียวในวงจรไฟฟ้า

series arc cut out

แปลว่าคัทเอาท์หรือเครื่องตัดตอนกระแสไฟ ซึ่งบางครั้งใช้ในการต่อกับโคมไฟอาร์คชนิดลำดับเพื่อช่วยให้กระแสไฟผ่านทางแรงต้านต่ำได้ และเมื่อโคมไฟดวงใดดับลงไป ก็ไม่ทำให้ดวงอื่นๆ กระทบกระเทือนไปด้วย

diamond to cut glass

แปลว่ากากเพชรที่ใช้ในการตัดกระจก หรือแก้ว

Shear stress:

แปลว่า(english) Stress acting parallel to an imaginary plane cut through an object.

By Coil

แปลว่า(english) Selling term which refers to product sold in the form of a coil vs. cut plate. "Bi Coil" is also used in production to refer to coils vs. cut plate

Bi-Coil

แปลว่า(english) Also BY-COIL. Tin Mill term. Customers buy "by coil" or "bi-coil" rather than cut sheets

Aspect-oriented development

แปลว่า(Software Engineering) a development approach that emphasizes "concerns" (also called "aspectual requirements" that incorporate features, functions and information content) that cut across multiple system functions

Bastard

แปลว่า(english) Threads,parts,tools and sizes that are not standard, such as, “Bastard Nuts”, “Bastard Plus”, “bastaard fittings and so forth. The term also refers to a standard coarse cut file.

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

AAC - Autoclaved Aerated Concrete

แปลว่า(Concrete Engineering) Exceptionally lightweight precast concrete with high thermal qualities and fire resistence. Suitable for cutting with ordinary hand tools. Mix design is composed of portland cement, sand or siliceous material, lime, gypsum, finely powdered aluminum, and water. Initial mix is a combination of portland cement, sand, lime and gypsum to produce a slurry. Finely powdered aluminum mixed into a paste is added prior to placement into large, rail-like forms. The finely powdered aluminum reacts with the alkaline components of the cement and lime to produce hydrogen gas, which increases the volume approximately five times producing a uniformly, dispersed cellular structure. Units are cut to required shape. Units are placed in an autoclave, an enclosed pressurized chamber, and steam cured at 3500 F. Approximately 80% of the ultimate volume consists of air voids.