ผลการค้นหา

Give the right of access to the site

แปลว่าให้สิทธิในการเข้าพื้นที่ก่อสร้าง

Butt end

แปลว่า(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.

Back End

แปลว่า(english) 1) Usually refers to the entry end of process lines. 2) The outside lap 2) of the produced coil, or the inside lap of the consumed coil.

Temper

แปลว่า(Concrete Engineering) The addition of water to the cement mix whether at the batch plant, during transit or at the jobsite to achieve the specified water to cement ratio.

Chair(s)

แปลว่า(Concrete Engineering) In concrete formwork, the support for the reinforcing steel.

Climatology

แปลว่า(Environmental Engineering) The study of the climate, how the earth's atmosphere performs over long periods of time.

Base

แปลว่า(english) The steel or concrete pedestal on which the coils are stacked during the batch annealing process.

Inertial Force:

แปลว่า(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.

Rotation:

แปลว่า(english) Motion of an object where the path of every point is a circle or circular arc. A rotation is defined by a point and vector which determine the axis of rotation. The direction of the vector is the direction of the axis and the magnitude of the vector is the angle of rotation.

Big Winch

แปลว่า(english) The tool used to spot (or position) the rail cars for unloading. It is located on the north end of the unloading area.

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Breakout

แปลว่า(english) An accident caused by the failure of the walls of the hearth of the furnace resulting in liquid iron or slag (or both) flowing uncontrolled out of the blast furnace.