ตัวกรองผลการค้นหา
Bare Spot
แปลว่า(english) A location on the strip where coating did not adhere.
aluminium edging strip
แปลว่าแผ่นอลูมิเนียมที่ทำเป็นขอบหรือริมหุ้มรอบๆ เช่น ขอบโต๊ะ
Bending Angle
แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.
Black Annealing
แปลว่า(english) A process of box annealing or pot annealing ferrous alloy sheet, strip or wire after hot working and pickling.
Black Plate
แปลว่า(english) A light weight or a thin uncoated steel sheet or strip so called because of its dark oxide coloring prior to pickling. It is manufactured by two different processes. (1) Form sheet bar on single stand sheet mills or sheet mills in tandem. This method is now almost obsolete. (2) On modern, high speed continuous tandem cold reduction mills from coiled hot rolled pickled wide strip into ribbon wound coils to finished gage. Sizes range from 12 to 32 in width, and in thicknesses from 55 lbs. to 275 lbs. base box weight. It is used either as is for stampings, or may be enameled or painted or tin or terne coated.
Bridling
แปลว่า(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.
Band Saw Steel (Wood)
แปลว่า(english) A hardened tempered bright polished high carbon cold rolled spring steel strip produced especially for use in the manufacture of band saws for sawing wood, non ferrous metals, and plastics. Usually carries some nickel and with a Rockwell value of approximately C40/45.
Burr Mashers
แปลว่า(english) Devices used to remove build up on edge of strip after the slitting process.
Band Wareroom
แปลว่า(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).