ตัวกรองผลการค้นหา
Bending Strength
แปลว่า(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.
Strain:
แปลว่า(english) The intensity of deformation at a point in an object. See normal strain and shear strain.
Blue Brittleness 2
แปลว่า(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.
Blast Furnace 2
แปลว่า(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.
Adsorption
แปลว่า(Environmental Engineering) A surface phenomena in which a solute (soluble material) concentrates or collects at a surface (the adsorbent).
Paper prototype
แปลว่า(Software Engineering) a paper representation of an application (e.g., story boards that describe the interaction at a human interface)
Boiler
แปลว่า(english) A closed vessel in which water, is transformed into steam at a given pressure and temperature under controlled conditions.
Anoxic process
แปลว่า(Environmental Engineering) A process which occurs only at very low levels of molecular oxygen or in the absence of molecular oxygen.
Ductility:
แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
Source reduction
แปลว่า(Environmental Engineering) The elimination or reduction of the waste at the source by modification of the actual process which produces the waste.
Butt end
แปลว่า(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.
Siting
แปลว่า(Environmental Engineering) Obtaining government (federal, state, and local) permission to construct an environmental processing, treatment, or disposal facility at a given site.