ผลการค้นหา

ค้นเจอ 670 รายการ

Aluminous Cement

(Concrete Engineering) A hydraulic cement in which the principal constituents are calcium aluminates, instead of calcium silicates which comprise the major ingredients of portland cement. (See calcium aluminate cement)

Fermentation

(Environmental Engineering) Energy production without the benefit of oxygen as a terminal electron acceptor, i.e. oxidation in which the net effect is one organic compound oxidizing another. See respiration.

Z-Mill

(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

Stiffness:

(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Brazing

(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.

Dry Rodded Weight

(Concrete Engineering) The weight of dry aggregate rodded into a cylindrical container of diameter approximately equal to the height, each of 3 layers rodded 25 times, and the excess aggregate struck off level with the top of the container

Inelastic:

(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Design

(Software Engineering) an activity that translates the requirements model into a more detailed model that is the guide to implementation of the software

Trickling filter

(Environmental Engineering) An attached growth biological process in which the microbial film is attached to non-moving rock or plastic media.

Levels of abstraction

(Software Engineering) the degree of detail with which some representation of the software is presented

Project tracking

(Software Engineering) the activity that enables a manager to understand the status of a project

Burn-On-Sand

(english) Sand adhering to the surface of the casting that is extremely difficult to remove.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด