ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 1,050 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "a kind of deer"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Blister

(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.

Box Annealing 2

(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.

Pin connection:

(english) In two dimensions, a pin connection restrains two translation degrees of freedom but does not restrain rotation. Since the rotation degree of freedom is unrestrained at a pin connection, it transfers no moment.

Center of Gravity (CG):

(english) The location of the resultant of gravity forces on an object or objects: sometimes called center of mass.

Dispersing Agent

(Concrete Engineering) An admixture capable of increasing the fluidity of pastes, mortars, or concretes by reduction of interparticle attraction.

Patterns

(Software Engineering) a stylized description or characterization of a software problem or capability and/or the manner in which a solution to the problem or capability may be characterized, applied, and implemented

Bevel

(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.

Transmissibility:

(english) The principle stating that a force has the same external effect on an object regardless of where it acts along its line of action.

Blowhole

(english) A defect in a casting caused by trapped steam or gas.

sink a die

แกะแม่พิมพ์, กัดบล๊อกแม่พิมพ์

tube a manchette

ท่ออัดน้ำปูน (ท่อเจาะรูพรุนและมีท่อยางยึดรัดรอบนอก ยอมให้น้ำปูนไหลออก แต่มิให้ไหลเข้า)

spring a leak

รั่ว, (เรือ) รั่ว

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด