ค้นเจอ 266 รายการ

Volatile solids

แปลว่า(Environmental Engineering) (VS) is the amount of matter which volatilizes (or burns) when a water sample is heated to 550EC.Volatile suspended solids

NPDES

แปลว่า(Environmental Engineering) The National Pollutant Discharge Elimination System. The discharge criteria and permitting system established by the U.S. EPA as a result of the Clean Water Act and its subsequent amendments or the permit required by each discharger as a result of the Clean Water Act.

base flow

แปลว่า1. น้ำที่ไหลในลำน้ำเกิดจากการไหลซึมออกมาของน้ำใต้ดิน ส่วนมากเกิดในช่วงฤดูแล้ง เป็น ground water runoff 2. ปริมาณน้ำเดิมที่ไหลอยู่ในลำน้ำก่อนเกิดน้ำท่า

Secondary standards

แปลว่า(Environmental Engineering) Recommended drinking water quality standards which relate to aesthetics and/or health. These standards are recommended, not required. See primary standards.

Defect removal efficiency (DRE)

แปลว่า(Software Engineering) a nondimension ratio (between 0 and 1) that provides an indication of the degree to which errors are removed from software before it is released to end-users

Primary standards

แปลว่า(Environmental Engineering) Required drinking water quality standards related directly to human health. These standards are required and enforceable by the U.S. EPA. See secondary standards.

Retempering

แปลว่า(Concrete Engineering) The addition of water and remixing of concrete which has started to stiffen: usually not allowed as it may affect the ultimate strength.

Blast Furnace Slag

แปลว่า(Concrete Engineering) A non-metallic waste product developed in the manufacture of pig iron, consisting basically of a mixture of lime, silica and alumina, the same oxides that make up portland cement, but not in the same proportions or forms. It is used both in the manufacture of portland blast furnace slag cement and as an aggregate for lightweight concrete.

Wagner Fineness

แปลว่า(Concrete Engineering) The fineness of materials such as portland cement expressed as total surface area in centimeters per gram as determined by the Wagner turbidimeter apparatus and procedure.

Cure

แปลว่า(Concrete Engineering) Method of maintaining sufficient internal humidity and proper temperature for freshly placed concrete to assure proper hydration of the cement, and proper hardening of the concrete.

Ball Burnishing

แปลว่า(english) A method of obtaining a high luster on small parts by rotating them in a wooden-lined barrel with water, burnishing soap, and stainless steel shot.

meter

แปลว่า(วิศว) หน่วยวัดความยาวเป็นเมตร; เครื่องวัด เช่น water meter = เครื่องวัดจำนวนน้ำ, หม้อมีเต้อรวัดน้ำ; electric meter = หม้อมีเต้อรวัดกระแสไฟฟ้า ฯลฯ

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z