ผลการค้นหา

Chemical fixation (or stabilization/solidification)

แปลว่า(Environmental Engineering) A term for several different methods of chemically immobilizing hazardous materials into a cement, plastic, or other matrix.

Precast

แปลว่า(Concrete Engineering) A concrete unit, structure or member that is cast and cured in an area other than its final position or place.

Water-Cement Ratio

แปลว่า(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.

BURST PRESSURE

แปลว่า(english) The level of pressure at which a component, pipe, tube, hose or other fluid passage will burst during application of internal pressure. Normally 2.5 - 4.0 times working pressure.

Facultative

แปลว่า(Environmental Engineering) A group of microorganisms which prefer or preferentially use molecular oxygen when available, but are capable of suing other pathways for energy and synthesis if molecular oxygen is not available.

Sack

แปลว่า(Concrete Engineering) A quantity of cement: 94 Ibs. in the United States, 87.5 Ibs. in Canada, for portland or air entraining portland cement, or as indicated on the sack for other kinds of cement.

Biosynthesis

แปลว่า(Environmental Engineering) Catabolism, the production of new cellular materials from other organic or inorganic chemicals.

Mass balance

แปลว่า(Environmental Engineering) An organized accounting of all inputs and outputs to an arbitrary but defined system. Stated in other terms, the rate of mass accumulation within a system is equal to the rate of mass input less the rate of mass output plus the rate of mass generation within the system.

Yield stress:

แปลว่า(english) A material loaded beyond its yield stress, no longer exhibits linear elastic behavior. Metals, particularly mild steel, generally have a very well defined yield stress compared to other materials. Yield stress is sometimes called yield strength.

Discrete settling

แปลว่า(Environmental Engineering) Settling in which individual particles settle independently, neither agglomerating or interfering with the settling of the other particles present. This occurs in waters with a low concentration of particles.

Butt Welding

แปลว่า(english) Joining two edges or ends by placing one against the other and welding them.

Bent Axis Pumps

แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.