ตัวกรองผลการค้นหา
Bright Annealing
แปลว่า(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.
Non-agitating Unit
แปลว่า(Concrete Engineering) A truck-mounted unit for transporting ready-mixed concrete short distances, not equipped to provide agitation (slow mixing) during delivery.
Brite
แปลว่า(english) 1) Regular galvanize coating (not minimized spangle or JP). 2) Rolls that have no grit; smooth finish on surface of steel.
Butt end
แปลว่า(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.
Secondary standards
แปลว่า(Environmental Engineering) Recommended drinking water quality standards which relate to aesthetics and/or health. These standards are recommended, not required. See primary standards.
Bloom 2
แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.
Entrapped Air
แปลว่า(Concrete Engineering) Air in concrete which is not purposely en-trained, Entrapped air bubbles are normally much larger and more irregular than entrained air bubbles.
Distributed load:
แปลว่า(english) An external force which acts over a region of length, surface, or area: essentially any external force which is not a concentrated force.
Retempering
แปลว่า(Concrete Engineering) The addition of water and remixing of concrete which has started to stiffen: usually not allowed as it may affect the ultimate strength.
Stability:
แปลว่า(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.
Work flow
แปลว่า(Software Engineering) the sequence of tasks that are required to accomplish some activity or action; often (but not always) used in conjunction with software process models
Weak acid
แปลว่า(Environmental Engineering) An acid that does not ionize completely under the conditions of interest. Examples include acetic acid, carbonic acid, and hypochlorous acid. See strong acid.