ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Concrete Engineering) In prestress concrete, the device used to stress the tendons.
(Environmental Engineering) The total suspended solids concentration in the activated sludge tank.
(Environmental Engineering) (TDS) is the amount of dissolved matter in the water.
ระบุในสัญญา
(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.
(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.
(english) Dirt or other impurities in the steel strip.
(Environmental Engineering) Autotrophic organisms which produce protoplasm using inorganic carbon and energy from the sun.
(english) A fictitious force used for convenience in visualizing the effects of forces on bodies in motion. For an accelerating body, the inertial force is considered as a body force whose resultant acts at the object's center of gravity in a direction opposite the acceleration. The magnitude of the force is the mass of the object times the magnitude of the acceleration.
(Environmental Engineering) A reaction in which the rate expression corresponds to the stoichiometric equation.
(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.
(Concrete Engineering) The temporary force exerted by the jacking device which introduces tension into the tendons. Jacking Stress In prestress concrete, the maximum stress occurring in a tendon during stressing.