ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Software Engineering) a bounded statement of what must be accomplished
(english) Having the equivalent lattice points at the corners of the unit cell, and at its center; sometimes called centered, or space-centered.
(english) The tendency of an object at rest to remain at rest, and of an object in motion to remain in motion.
(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.
(english) The temperature at which austenite begins to form on heating.
(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
(english) Oven use to bake a number of cores at one time.
(Software Engineering) a statement of basic requirements of the software to be built
(Environmental Engineering) (FS) are the solids that do not volatilize at 550°C.
(english) Firing a mold at a high temperature to remove pattern material residue.
(Concrete Engineering) The addition of water to the cement mix whether at the batch plant, during transit or at the jobsite to achieve the specified water to cement ratio.
(Concrete Engineering) A room used for storing and curing cementitious test specimens. The atmosphere of this room is maintained at a temperature of 73.4 3.0'F or 23.0*1.7'0 and relative humidity of at least 98 percent. These facilities must be adequate to continually maintain free moisture on the exteriors of test specimens.