ผลการค้นหา

axis of symmetry

แปลว่าเส้นแกนของอาคารหรืออื่น ๆ ที่มีรูปร่างลักษณะสมดุลกัน

axis of sphere

แปลว่าเส้นผ่าศูนย์กลางของวงกลม

axis of curve

แปลว่าเส้นแกนแบ่งครึ่งกลางโค้งออกเป็น 2 ส่วนเท่า ๆ กัน

axis of a sphere

แปลว่าเส้นผ่าศูนย์กลางของลูกกลม

Bend Radius

แปลว่า(english) The inside radius of a bent section,

Axial force:

แปลว่า(english) A system of internal forces whose resultant is a force acting along the longitudinal axis of a structural member or assembly.

Rotation:

แปลว่า(english) Motion of an object where the path of every point is a circle or circular arc. A rotation is defined by a point and vector which determine the axis of rotation. The direction of the vector is the direction of the axis and the magnitude of the vector is the angle of rotation.

Moment of inertia (I):

แปลว่า(english) Moment of inertia has two distinct but related meanings: 1) it is a property of a an object relating to the magnitude of the moment required to rotate the object and overcome its inertia. 2) A property of a two dimensional cross section shape with respect to an axis, usually an axis through the centroid of the shape.

Shear:

แปลว่า(english) An system of internal forces whose resultant is a force acting perpendicular to the longitudinal axis of a structural member or assembly: sometimes called shear force.

Bamboo Grain Structure

แปลว่า(english) A structure in wire or sheet in which the boundaries of the grains tend to be aligned normal to the long axis and to extend completely through the thickness.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Section Modulus:

แปลว่า(english) A property of a cross sectional shape, which depends on shape, and orientation. Section modulus is usually denoted S, and S = I/c, where I = moment of inertia about an axis through the centroid, and c is the distance from the centroid to the extreme edge of the section.