ผลการค้นหา

Bench Grinder

แปลว่า(english) A small grinding machine for shaping and sharpening the cutting edges of tools.

Brale

แปลว่า(english) A diamond penetrator, conical in shape, used with a Rockwell hardness tester for hard metals.

Z-Mill

แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

shape

แปลว่ารูปร่าง

Shape Factor

แปลว่าตัวประกอบรูปทรง

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

particle shape

แปลว่ารูปร่างอนุภาค

Bainite

แปลว่า(english) A eutectoid transformation product of ferrite and a fine dispersion of carbide, generally formed at temperatures below 840 to 930 F (450 to 500 C): upper bainite is an aggregate containing parallel lath-shape units of ferrite, produces the so-called feathery appearance in optical microscopy, and is formed at temperatures above about 660 F (350 C); lower bainite consists of individual plate-shape units and is formed at temperatures below about 660 F (350 C). Also, a slender, needle-like (acicular) microstructure appearing in spring steel strip characterized by toughness and greater ductility than tempered Martensite. Bainite is a decomposition product of Austenite best developed at interrupted holding temperatures below those forming fine pearlite and above those giving Martensite.

Funicular:

แปลว่า(english) A funicular shape is one similar to that taken by a suspended chain or string subjected to a particular loading.

chapel

แปลว่าหอสวดมนต์

Deformation:

แปลว่า(english) A change in the shape of an object or material.

Blacking Hole

แปลว่า(english) Irregular-shaped surface cavities in a casting containing carbonaceous matter. Caused by spilling off of the blacking from the mold surface.