ค้นเจอ 28 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "*Occur*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Flocculant settling

(Environmental Engineering) Settling in which particle concentrations are sufficiently high that particle agglomeration occurs. This results in a reduction in the number of particles and an increase in average particle mass. As agglomeration occurs higher settling velocities result.

Condensation

(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.

Discrete settling

(Environmental Engineering) Settling in which individual particles settle independently, neither agglomerating or interfering with the settling of the other particles present. This occurs in waters with a low concentration of particles.

Saltwater intrusion

(Environmental Engineering) The gradual replacement of freshwater by saltwater in coastal areas where excessive pumping of groundwater occurs.

Anaerobic process

(Environmental Engineering) A process which only occurs in the absence of molecular oxygen.

Business risks

(Software Engineering) the set of potential business problems or occurrences that may cause the project to fail

Bending Strength

(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

Anoxic process

(Environmental Engineering) A process which occurs only at very low levels of molecular oxygen or in the absence of molecular oxygen.

Compression settling

(Environmental Engineering) Settling which occurs in the lower reaches of clarifiers where particle concentrations are highest. Particles can settle only by compressing the mass of particles below.

Blush

(english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive.

Structural model:

(english) An idealization for analysis purposes of a real or conceived structure. A structural model includes boundaries limiting the scope of the analysis. Supports occur at these boundaries, representing things which hold the structure in place.

Blue Brittleness 2

(english) Reduced ductility occurring as a result of strain aging, when certain ferrous alloys are worked between 300 and 700 (degrees) F. This phenomenon may be observed at the working temperature or subsequently at lower temperatures.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z