ตัวกรองผลการค้นหา
Brittle Inter-metallic Layer
แปลว่า(english) An iron-zinc alloy layer formed between the steel substrate and the free zinc of galvanized coatings.
non-irrigated area
แปลว่าพื้นที่ที่ยังไม่ได้รับน้ำชลประทาน : ดู area, non-irrigation
By-Pass
แปลว่า(english) Manual control used to by-pass automatic valve if it fails or in an emergency.
Z-Mill
แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.
button-head screws
แปลว่า(วิศว) สลักเกลียวตัวผู้มีหัวบากเป็นช่องแบ่งครึ่งสำหรับใช้เหล้กไขควงเสียบหมุนบางทีก็เรียกกันว่า haif - roundscrews
curve, area-capacity
แปลว่าโค้งพื้นที่-ความจุ : เส้นโค้งแสดงความสัมพันธ์ระหว่างพื้นที่ผิวน้ำและปริมาตรของน้ำ
sharp-crested weir
แปลว่าฝายสันคม : ดู weir, sharp - crested
tee-square
แปลว่าไม้ฉากรูปตัว T (ความหมายอย่างเดียวกับ T-square)
broken-back transition
แปลว่าดู transition, broken-back
Acid-Process
แปลว่า(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.
curve, depth-duration
แปลว่าเส้นโค้งแสดงความสัมพันธ์ระหว่างช่วงเวลาที่ฝนตกกับความลึกของน้ำฝน เรียกอีกอย่างหนึ่งว่า rainfall intensity-duration curve
GFRC - Glass Fiber Reinforced Concrete
แปลว่า(Concrete Engineering) Concrete panels, usually architectural designs, reinforced with a high zirconia (16% minimum), alkali-resistant glass fiber. Optimum glass fiber content of 5% by weight. Lower fiber content results in lower early ultimate strengths, higher fiber content can produce composite compaction and consolidation difficulties.