ผลการค้นหา

System of Forces:

แปลว่า(english) One or more forces and/or moments acting simultaneously.

Internal force:

แปลว่า(english) Forces which hold an object together when external forces or other loads are applied. Internal forces are sometimes called resisting forces since they resist the effects of external forces.

Ford, Henry

แปลว่าเฮนรี่ฟอร์ด ชาวอเมริกันผู้ประดิษฐ์รถยนต์ Ford

Jacking Force

แปลว่า(Concrete Engineering) The temporary force exerted by the jacking device which introduces tension into the tendons. Jacking Stress In prestress concrete, the maximum stress occurring in a tendon during stressing.

uniform flow

แปลว่าการไหลแบบสม่ำเสมอ : ดู flow, uniform

Formulation

แปลว่า(Software Engineering) a Web engineering action that identifies business need, describes WebApp objectives, defines major features and functions, and establishes mechanisms for requirements gathering

forepolling or spilling

แปลว่าการใช้เข็มเย็บดินแนวราบเหนือหน้าอุโมงค์

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

Centroid:

แปลว่า(english) Similar to the concept of center of gravity, except that it applies to a two dimensional shape rather than an object. For a given shape, the centroid location corresponds to the center of gravity for a thin flat plate of that shape, made from a homogeneous material.

Bonding Clay (Bonderise)

แปลว่า(english) Any clay suitable for use as a bonding material.

force feed lubrication

แปลว่า(รถยนต์, กลไก, เครื่องจักร) การส่งน้ำมันหล่อลื่นด้วยกำลังอัด

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.