ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.
(Concrete Engineering) A truck-mounted unit for transporting ready-mixed concrete short distances, not equipped to provide agitation (slow mixing) during delivery.
(english) 1) Regular galvanize coating (not minimized spangle or JP). 2) Rolls that have no grit; smooth finish on surface of steel.
(english) The residual portion of an extrusion billet that is not forced through the die at the end of the extrusion cycle.
(Environmental Engineering) Recommended drinking water quality standards which relate to aesthetics and/or health. These standards are recommended, not required. See primary standards.
(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.
(Concrete Engineering) Air in concrete which is not purposely en-trained, Entrapped air bubbles are normally much larger and more irregular than entrained air bubbles.
(english) An external force which acts over a region of length, surface, or area: essentially any external force which is not a concentrated force.
(Concrete Engineering) The addition of water and remixing of concrete which has started to stiffen: usually not allowed as it may affect the ultimate strength.
(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.
(Software Engineering) the sequence of tasks that are required to accomplish some activity or action; often (but not always) used in conjunction with software process models
(Environmental Engineering) An acid that does not ionize completely under the conditions of interest. Examples include acetic acid, carbonic acid, and hypochlorous acid. See strong acid.