ผลการค้นหา

Statically indeterminate:

แปลว่า(english) A statically indeterminate structure is one where there is more than one distribution of internal forces and/or reactions which satisfies equilibrium.

Bit, Tool (cutter)

แปลว่า(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.

Base Box

แปลว่า(english) Unit of area of 112 sheets of tin mil products (tin plate, tin free steel or black plate) 14 by 20 inches, or 31,360 square inches. Tin Plate is sold, and carried in finished inventory, on a weight per unit area rather than on a thickness basis.

Rebound

แปลว่า(Concrete Engineering) Wet shotcrete or sand and cement which bounces away from a surface again at which pneumatically applied mortar is being projected.

Abrasive 2

แปลว่า(english) Natural – sandstone,emery,corundum,diamonds, or Artificial – silicon carbide,aluminum oxide – material used for making grinding wheels,andpaper,abrasive and lapping compunds.

Portland Blast- slag Cement Furnace (ASTM C 595)

แปลว่า(Concrete Engineering) The product obtained by intimately intergrinding or an intimate and uniform blending a mixture of granulated blast furnace slag and portland-cement clinker

Ultimate disposal

แปลว่า(Environmental Engineering) The process of returning residuals back to the environment in a form which will have the minimal or reduced negative environmental impacts.

Consistency

แปลว่า(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

Bed-In

แปลว่า(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.

Waste minimization

แปลว่า(Environmental Engineering) The elimination or reduction of a waste prior to its generation. This is accomplished by process changes rather than waste treatment methods.

Box Annealing 2

แปลว่า(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.

Aging 1

แปลว่า(english) A change in the properties of certain metal and alloys (such as steel) that occurs at ambient or moderately elevated temperatures after a hot working heat treatment or cold working operation. Typical properties impacted are hardness, yield strength, tensile strength, ductility, impact value, formability, magnetic properties, etc. See also Non-aging.