ผลการค้นหา

Burning 2

แปลว่า(english) Heating a metal beyond the temperature limits allowable for the desired heat treatment, or beyond the point where serious oxidation or other detrimental action begins.

Ductility:

แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.

Business risks

แปลว่า(Software Engineering) the set of potential business problems or occurrences that may cause the project to fail

Project risks

แปลว่า(Software Engineering) the set of potential project problems or occurrences that may cause the project to fail

Stability:

แปลว่า(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.

Project control

แปลว่า(Software Engineering) the control of quality and change

Bend Radius

แปลว่า(english) The inside radius of a bent section,

Elastic limit:

แปลว่า(english) The point beyond which the deformations of a structure or material are no longer purely elastic.

Photochemical pollutants

แปลว่า(Environmental Engineering) Chemicals which react photochemically (in the presence of sunlight) to destroy ozone in the stratosphere.

Toxicity

แปลว่า(Environmental Engineering) A U.S. EPA hazardous waste characteristic defined with a rigorous test procedure, the TCLP (for Toxicity Characteristic Leaching Procedure). In the procedure, a waste is extracted for 24 hours with an acetic acid solution. The acid extract is then analyzed for the presence of any of the contaminants listed in the procedure.

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Metalimnion

แปลว่า(Environmental Engineering) The middle layer of a lake.