ผลการค้นหา

Bright Annealing 2

แปลว่า(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.

Security

แปลว่า(Software Engineering) the ability of software to operate in a manner that is secure from internal or external attack

Adsorption

แปลว่า(Environmental Engineering) A surface phenomena in which a solute (soluble material) concentrates or collects at a surface (the adsorbent).

Deflection:

แปลว่า(english) This word usually carries the same meaning as displacement, although it is sometimes used in place of deformation.

Biochemical oxygen demand (BOD)

แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any organic matter present in a water during a specified period of time, usually 5 days. It is an indirect measure of the amount of organic matter present in a water.

Backoff

แปลว่าRemoval of part of coil from entry end of unit; may be necessitated by a defect in coil or by a wreck in the mill, etc. Backoff weight is the part of the coil that is removed and not finished/produced.

Boron Steels

แปลว่า(english) The addition of boron in the range 0.0005-0.005% to certain steels increases the hardenability. A range of boron steels is now listed in the current BS 970 and are widely used for the production of cold headed fastenings.

Acetyl Tributyl Citrate

แปลว่า(english) One of the lubricating oils generally applied on tin Mill Products (tin plate, TFS-chrome/chrome oxide coated steel, and blackplate).

Chlorofluorocarbons

แปลว่า(Environmental Engineering) Synthetic organic compounds used for refrigerants, aerosol propellants (prohibited in the U.S.), and blowing agents in plastic foams. CFCs migrate to the upper atmosphere destroying ozone and increasing global warming. Typical atmospheric residence times are 50 to 200 years.

Burnt Rubber

แปลว่า(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.

Brown Sharp Gages

แปลว่า(english) A standard series of sizes refered to by numbers, in which the diameter of wire or thickness of sheet metal is generally produced and which is used in the manufacture of brass, bronze, copper, copper-base alloys and aluminum. These gage numbers have a definite relationship to each other. In this system, the decimal thickness is reduced by 50% every six gage numbers- while temper is expressed by the number of B&S gage numbers as cold reduced in thickness from previous annealing. For each B&S gage number in thickness reduction, where is assigned a hardness value of 1/4 hard.

Trickling filter

แปลว่า(Environmental Engineering) An attached growth biological process in which the microbial film is attached to non-moving rock or plastic media.