ผลการค้นหา

Bolster (die block)

แปลว่า(english) A “tool” or reinforcing part which supports the backer-which, in turn, supports an extruding die against the pressure of extrusion.

Beam and Sling

แปลว่า(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.

Change control

แปลว่า(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner

Concentrated force:

แปลว่า(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.

Support:

แปลว่า(english) A support contributes to keeping a structure in place by restraining one or more degrees of freedom. In a structural model, supports represent boundary entities which are not included in the model itself, e.g., foundations, abutments, or the earth itself. For each restrained translation degree of freedom at a support, there is a corresponding reaction force; for each restrained rotation degree of freedom, there is a reaction moment.

Backing Sand

แปลว่า(english) The bulk of the sand in the flask. The sand compacted on top of the facing sand that covers the pattern.

Zircon

แปลว่า(english) The mineral zircon silicate, ZrSiO4, a very high melting point acid refractory material used as a molding material in steel foundries.

Quality management

แปลว่า(Software Engineering) a set of software engineering actions that helps ensure that software is built in a way that achieves high quality

Ottawa Sand

แปลว่า(Concrete Engineering) A sand used as a standard in testing hydraulic cements by means of mortar test specimens. Sand is produced by processing silica rock particles obtained by hydraulic mining of the orthoquartzite situated in open-pit deposits near Ottawa, Illinois; naturally rounded grains of nearly pure quartz.

Precast

แปลว่า(Concrete Engineering) A concrete unit, structure or member that is cast and cured in an area other than its final position or place.

Belt Wrapper

แปลว่า(english) Line equipment used in the Tin Mill for starting coils on prime or reject reels. The belt wrapper ensures a proper start.

Condensation

แปลว่า(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.