ตัวกรองผลการค้นหา
Equilibrium:
แปลว่า(english) An object is in equilibrium if the resultant of the system of forces acting on it has zero magnitude. See static equilibrium and dynamic equilibrium.
Acid Brittleness (Pickling Brittleness)
แปลว่า(english) Brittleness resulting from pickling steel in acid; hydrogen, formed by the interaction between iron and acid, is partially absorbed by the metal, causing acid brittleness.
Refuse derived fuel (RDF)
แปลว่า(Environmental Engineering) A fuel derived from the combustible portion of municipal solid waste. The fuel is often processed into small briquettes, similar in size to charcoal.
Bright Annealed Wire
แปลว่า(english) Steel wire bright drawn and annealed in controlled non-oxidizing atmosphere so that surface oxidation is reduced to a minimum and the surface remains relatively bright.
Acid Steel
แปลว่า(english) Steel melted in a furnace with an acid bottom and lining and under a slag containing an excess of an acid substance such as silica.
Preplaced Concrete
แปลว่า(Concrete Engineering) Concrete manufactured by placing clean, graded coarse aggregate in a form and later injecting a portland cement-sand grout under pressure, to fill the voids.
Work flow
แปลว่า(Software Engineering) the sequence of tasks that are required to accomplish some activity or action; often (but not always) used in conjunction with software process models
Acid-Brittleness
Addition Agent
แปลว่า(english) 1) Any material added to a charge of molten metal in bath or ladle to bring alloy to specifications, 2) reagent added to plating bath.
Toxicity
แปลว่า(Environmental Engineering) A U.S. EPA hazardous waste characteristic defined with a rigorous test procedure, the TCLP (for Toxicity Characteristic Leaching Procedure). In the procedure, a waste is extracted for 24 hours with an acetic acid solution. The acid extract is then analyzed for the presence of any of the contaminants listed in the procedure.
Box Annealing
แปลว่า(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.
Entrained Air (See air entrainment)
แปลว่า(Concrete Engineering) Microscopic air bubbles intentionally incorporated in mortar or concrete, to improve workability and durability (usually imparting a higher degree of resistance to freezing and thawing).