ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 411 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "*-or*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Moist Room

(Concrete Engineering) A room used for storing and curing cementitious test specimens. The atmosphere of this room is maintained at a temperature of 73.4 3.0'F or 23.0*1.7'0 and relative humidity of at least 98 percent. These facilities must be adequate to continually maintain free moisture on the exteriors of test specimens.

Back Gears

(english) Gears fitted to a machine to increase the number of spindle speeds obtainable with a cone or step pulley belt drive.

Chemical oxygen demand (COD)

(Environmental Engineering) The amount of oxygen required to oxidize any organic matter in the water using harsh chemical conditions.

Measurement

(Software Engineering) collecting quantitative data about the software or the software engineering processMetrics

kentledge or cantledge

น้ำหนักกดยัน (งานทดสอบเข็ม)

Software quality assurance (SQA)

(Software Engineering) a series of activities that assist an organization in producing high quality software

Bake

(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.

Bundle

(english) Specific number of sheets which equals 1 unit of production. Number is determined by multiplying sheets/Packages/BUNDLE. For example, an order calls for 112 sheets/package. According to the maximum height allowed for a lift. Therefore, multiplying 15 packages X 112 sheets 3D 1680 sheets/bundle.

Elastic limit:

(english) The point beyond which the deformations of a structure or material are no longer purely elastic.

Receiving water

(Environmental Engineering) A water which receives wastewater (treated or otherwise) discharges.

Banding

(english) Inhomogeneous distribution of alloying elements or phases aligned in filaments or plates parallel to the direction of working.

Broach

(english) A long, tapered cutting tool with serrations which,when forced through a hole or across a surface, cuts a desired shape or size.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด