ตัวกรองผลการค้นหา
Bench Grinder
แปลว่า(english) A small grinding machine for shaping and sharpening the cutting edges of tools.
Basic Oxygen Process 2
แปลว่า(english) A steel making process wherein oxygen of the highest purity is blown onto the surface of a bath of molten iron contained in a basic lined and ladle shaped vessel. The melting cycle duration is extremely short with quality comparable to Open Hearth Steel.
Project planning
แปลว่า(Software Engineering) the activity that creates the Project Plan
Beam and Sling
แปลว่า(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.
Bearing Load
แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.
Mass:
แปลว่า(english) A property of an object measured by the degree that it resists acceleration.
Blacking Hole
แปลว่า(english) Irregular-shaped surface cavities in a casting containing carbonaceous matter. Caused by spilling off of the blacking from the mold surface.
Vicat Apparatus
แปลว่า(Concrete Engineering) A penetration device used to determine the setting characteristics of hydraulic cements.
Bloom 2
แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.
Bottom Die
แปลว่า(english) The stationary half-die.
Cell
แปลว่า(Environmental Engineering) A unit of varying dimensions in a landfill which is isolated from the environment by 6 to 12 inches of soil cover. A cell is one day's waste or less. A cell is covered with soil at the end of each day.
Errors
แปลว่า(Software Engineering) a lack of conformance found before software is delivered to the customer