ผลการค้นหา

Trade In* *Trade In *Trade In*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 332 รายการ

AIR BLEEDER AUTOMATIC

แปลว่า(english) A valve that is fit into a hydraulic pipeline to facilitate automatic release of air trapped in the pipeline. See also AIR BLEEDER, MANUAL.

Bonderizing

แปลว่า(english) The coating of steel with a film composed largely of zinc phosphate in order to develop a better bonding surface for paint or lacquer.

Respiration

แปลว่า(Environmental Engineering) Energy production in which oxygen is the terminal electron acceptor, i.e. oxidation to produce energy where oxygen is the oxidizing agent. See fermentation.

Reversible reaction

แปลว่า(Environmental Engineering) A reaction in which the reactant(s) proceed to product(s), but the products react at an appreciable rate to reform reactant(s).

Bead

แปลว่า(english) 1)Half-round cavity in a mold, or half-round projection or molding on a casting, 2) a single deposit of weld metal produced by fusion.

Cement Content

แปลว่า(Concrete Engineering) A quantity of cement contained in a unit volume of concrete or mortar, ordinarily expressed as pounds, barrels, or bags per cubic yard.

AB Srews

แปลว่า(english) Sheet metal screws with pointed ends similar to type-A screws and thread dimensions similar to type-B. Type AB screws are seldom used in stainless.

Biofilm

แปลว่า(Environmental Engineering) A film of microorganisms attached to a surface, such as that on a trickling filter, rotating biological contactor, or rocks in natural streams.

Holding Period Period

แปลว่า(Concrete Engineering) In the manufacture of concrete products, the period between completion of casting and the introduction of additional heat or the steam curing period

Irreversible reaction

แปลว่า(Environmental Engineering) A reaction in which the reactant(s) proceed to product(s), but the products react at an appreciable rate to reform reactant(s).

Blasting (Blast Cleaning)

แปลว่า(english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting.

Ball Burnishing

แปลว่า(english) A method of obtaining a high luster on small parts by rotating them in a wooden-lined barrel with water, burnishing soap, and stainless steel shot.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด