ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Environmental Engineering) The total amount of oxygen required to oxidize any organic matter present in a water, i.e. after an extended period, such as 20 or 30 days.
(Concrete Engineering) Deleterious chemical and/or physical re-action between sulfates in ground water or soil and certain constituents in cement, which result in expansion and disruption of the concrete.
(Environmental Engineering) A waste which; 1) reacts violently with water, 2) forms potentially explosive mixtures with water, 3) is normally unstable, 4) contains cyanide or sulfide in sufficient quantity to evolve toxic fumes at high or low pH, 5) is capable of exploding if heated under pressure, or 6) is an explosive compound listed in Department of Transportation (DoT) regulations. One of EPA's four hazardous waste properties.
(Environmental Engineering) A landfill which has containment measures such as liners and a leachate collection system so that materials placed in the landfill will not migrate into the surrounding soil, air and water.
(Environmental Engineering) Settling in which particle concentrations are sufficient that particles interfere with the settling of other particles. Particles settle together as a body or structure with the water required to traverse the particle interstices.
(Environmental Engineering) Semi-aquatic land, that is land that is either inundated or saturated by water for varying periods of time during each year, and that supports aquatic vegetation which is specifically adapted for saturated soil conditions.
(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.
(english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive.
(Concrete Engineering) The ability of a material or product to reduce or eliminate gaseous transmissions through it's mass; measured as the rate of Water Vapor Transmission (WVT). Note: Not all materials that are waterproof are vaporproof; all materials that are vaporproof are inherently waterproof.
บานปิดเปิดทางเดียว : 1. บานหรือลิ้นปิดเปิดติดอยู่ที่ตอนปลายท่อจ่ายน้ำของเครื่องสูบน้ำ เพื่อป้องกันการไหลกลับของน้ำ เมื่อเครื่องสูบน้ำหยุดทำงาน 2. บานหรือลิ้นปิดเปิดควบคุมระดับน้ำเพื่อป้องกันน้ำท่วม มักออกแบบให้เปิดเมื่อระดับน้ำด้าน เหนือน้ำสูงกว่าระดับท้ายน้ำเพื่อระบายน้ำและปิดเมื่อระดับน้ำด้านท้ายน้ำสูงขึ้นเท่ากับหรือ มากกว่าระดับน้ำด้านเหนือน้ำ เพื่อป้องกันไม่ให้น้ำไหลกลับบางครั้งเรียก flap gate
ความต้องการใช้น้ำชลประทาน : ปริมาณน้ำชลประทานที่ต้องการเพื่อการเพาะปลูก ซึ่งนอกเหนือไปจากปริมาณน้ำ ที่พืชได้รับจากธรรมชาติ เช่น ฝน น้ำค้าง ฯลฯ ปริมาณน้ำนี้จะต้องคิดเผื่อไว้สำหรับการระเหย และการสูญเสียน้ำทางอื่นที่ไม่สามารถหลีกเลี่ยงได้ มักแสดงอยู่ในรูปแบบของความลึกของน้ำต่อหนึ่งหน่วยพื้นที่ โดยอาจระบุช่วงเวลาที่ต้องการด้วยก็ได้ เช่น ต่อเดือน ต่อปีหรือต่อฤดูเพาะปลูกหนึ่ง เป็นต้น หรือหากแสดงอยู่ในรูปแบบเดียวกับหน่วยของ ชลภาระ (water duty) มันก็คือค่าของชลภาระนั่นเอง
(Concrete Engineering) The volume of an ingredient in its solid state, without voids between individual pieces or particles, in the case of fluids, the cubic content occupied. In concrete, the actual volume occupied by the different ingredients determined by dividing the weight of each ingredient pounds, by ifs specific gravity, times the weight of one cubic foot of water in pounds. Example: Absolute Volume of one sack of cement equals: 94 ๗ (3.15X62.4) = 0.478 cubic feet