ผลการค้นหา

Anoxic process

แปลว่า(Environmental Engineering) A process which occurs only at very low levels of molecular oxygen or in the absence of molecular oxygen.

Consumers

แปลว่า(Environmental Engineering) Organisms which consume protoplasm produced from photosynthesis or consume organisms from higher levels which indirectly consume protoplasm from photosynthesis.

In situ treatment

แปลว่า(Environmental Engineering) Treatment of a waste in place, as opposed to pumping or digging the waste up and then treating it.

Burnt Rubber

แปลว่า(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.

Bolster (die block)

แปลว่า(english) A “tool” or reinforcing part which supports the backer-which, in turn, supports an extruding die against the pressure of extrusion.

Beam and Sling

แปลว่า(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.

Funicular:

แปลว่า(english) A funicular shape is one similar to that taken by a suspended chain or string subjected to a particular loading.

Impermeable

แปลว่า(Concrete Engineering) The ability of a material or product to reduce or eliminate gaseous transmissions through it's mass; measured as the rate of Water Vapor Transmission (WVT). Note: Not all materials that are waterproof are vaporproof; all materials that are vaporproof are inherently waterproof.

Buff

แปลว่า(english) To polish A smooth finish of high luster with a cloth or fabric wheel to which a compund has been added

Brite

แปลว่า(english) 1) Regular galvanize coating (not minimized spangle or JP). 2) Rolls that have no grit; smooth finish on surface of steel.

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

Adeline Steelmaking Process

แปลว่า(english) Method of producing a precision casting of steel or steel alloys using aluminolthermic process and lost wax, followed by centrifugal action.