ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
ทำให้เสียสิทธิ
พรวนดิน
ตั้งเสา
ถัดมุมถนนไปหน่อย, บริเวณมุมถนน, ใกล้ๆ กับบริเวณหัวถนน
บอกเลิกสัญญา
(english) The lateral deviation from straightness
(Concrete Engineering) The maintenance of ambient conditions during the setting and hardening of concrete so that heat is neither lost nor gained from the surroundings of the concrete.
(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.
(english) The intensity of internal force acting at a point in an object. Stress is measured in units of force per area. See shear stress and normal stress.
(english) Two force systems are statically equivalent when their resultants are equal. Physically, this means that the force systems tend to impart the same motion when applied to an object; note that the distribution of resulting internal forces in the object may be different.
(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.
(english) A vessel, normally cylindrical, which is used to store fluid and gas for future release of the energy in the compressed fluid and gas. Normally contains a diaphragm or piston between the fluid (liquid) and gas chambers. Fluid is normally introduced at one end and the gas at the opposite end.