ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Software Engineering) an informal measure of the degree to which a software component implements a single, focused function
(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.
(Environmental Engineering) Small particles which have a negligible settling velocity. These particles have a very small mass so gravitational force is low compared to surface frictional forces. Typical colloidal sizes range from 10-3 mm to 1 mm.
(english) Heating hot rolled ferrous sheet in an open furnace to a temperature within the transformation range and then cooling in air, in order to soften the metal. The formation of a bluish oxide on the surface is incidental.
(Software Engineering) application software used to perform software engineering tasks (e.g., design tools, testing tools); see also CASE tools
(Software Engineering) a technique that is used during analysis and intended to help isolate basic data objects and functions
(Software Engineering) trying to develop design models or an understanding of design using program code as a starting point
(english) A separator or diaphragm usually found in a chamber to facilitate separation of two (2) fluids or gases.
(Concrete Engineering) Development of relatively small cavities in a concrete surface, due to phenomena such as cavitation or corrosion.
(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.
(Software Engineering) the ability of software to operate in a manner that is secure from internal or external attack
(english) A piece of stock (also call a “slug” or “multiple”) from which a forging is to be made.