ผลการค้นหา

Errors

แปลว่า(Software Engineering) a lack of conformance found before software is delivered to the customer

formaldehyde

แปลว่า(เคมี) แก๊สเป็นพิษชนิดหนึ่ง (HCHO) ลักษณะไม่มีสี ละลายง่ายในน้ำธรรมดา ในรูปลักษณะที่เป็นน้ำเรียกกนคุ้น ๆ ว่า ฟอรมาลิน เป็นตัวทำลายเชื้อโรคที่ดีที่สุด ใช้เป็นวัตถุย้อมสี, สินค้าที่ทำด้วยยาง, หมึก, ฟอกหนัง ฯลฯ

Preplaced Concrete

แปลว่า(Concrete Engineering) Concrete manufactured by placing clean, graded coarse aggregate in a form and later injecting a portland cement-sand grout under pressure, to fill the voids.

flow, non-uniform

แปลว่าการไหลแบบเปลี่ยนแปลง : ดู flow, varied

Inelastic:

แปลว่า(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Bit, Tool (cutter)

แปลว่า(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.

Energy:

แปลว่า(english) A property of a body related to its ability to move a force through a distance opposite the force's direction; energy is the product of the magnitude of the force times the distance. Energy may take several forms: see kinetic energy, potential energy, and elastic energy.

Contract Bond

แปลว่าหลักประกันสัญญา, หนังสือค้ำประกันสัญญา (เหมือน Performance Bond)

Strain:

แปลว่า(english) The intensity of deformation at a point in an object. See normal strain and shear strain.

Brittle Fracture 2

แปลว่า(english) Fracture preceded by little or negligible plastic deformation.

Box Annealing 2

แปลว่า(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.

Brazing

แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.