ผลการค้นหา

ค้นเจอ 561 รายการ

Blue Annealing

(english) Heating hot rolled ferrous sheet in an open furnace to a temperature within the transformation range and then cooling in air, in order to soften the metal. The formation of a bluish oxide on the surface is incidental.

Bright Annealing 2

(english) The process of annealing in a protective atmosphere so as to prevent discoloration of the bright surface desired.

Photophosphorylation

(Environmental Engineering) The synthesis of the energy storage compound adenosine triphosphate (ATP) from adenosine diphosphate (ADP) using solar energy.

Center of Gravity (CG):

(english) The location of the resultant of gravity forces on an object or objects: sometimes called center of mass.

Chemical oxygen demand (COD)

(Environmental Engineering) The amount of oxygen required to oxidize any organic matter in the water using harsh chemical conditions.

Stiffness:

(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Mass balance

(Environmental Engineering) An organized accounting of all inputs and outputs to an arbitrary but defined system. Stated in other terms, the rate of mass accumulation within a system is equal to the rate of mass input less the rate of mass output plus the rate of mass generation within the system.

Section Modulus:

(english) A property of a cross sectional shape, which depends on shape, and orientation. Section modulus is usually denoted S, and S = I/c, where I = moment of inertia about an axis through the centroid, and c is the distance from the centroid to the extreme edge of the section.

Belly Roll

(english) Roll used on the line to steady plate.

Design walkthrough

(Software Engineering) a formal technical review of the design

Preliminary design

(Software Engineering) creates representation of the data and architecture

Base Metal Contamination

(english) Dirt or other impurities in the steel strip.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด