ผลการค้นหา

Design

แปลว่า(Software Engineering) an activity that translates the requirements model into a more detailed model that is the guide to implementation of the software

Section Modulus:

แปลว่า(english) A property of a cross sectional shape, which depends on shape, and orientation. Section modulus is usually denoted S, and S = I/c, where I = moment of inertia about an axis through the centroid, and c is the distance from the centroid to the extreme edge of the section.

Transmissibility:

แปลว่า(english) The principle stating that a force has the same external effect on an object regardless of where it acts along its line of action.

Unit Water Content

แปลว่า(Concrete Engineering) The quantity of water per unit volume of freshly mixed concrete, often expressed as gallons or pounds per cubic yard. This is the quantity of water on which the water cement ratio is based, and does not include water absorbed by the aggregate

Bridle

แปลว่า(english) A set of rolls used to maintain tension on the strip as it goes through the line.

Ultimate disposal

แปลว่า(Environmental Engineering) The process of returning residuals back to the environment in a form which will have the minimal or reduced negative environmental impacts.

Retempering

แปลว่า(Concrete Engineering) The addition of water and remixing of concrete which has started to stiffen: usually not allowed as it may affect the ultimate strength.

Black box testing

แปลว่า(Software Engineering) testing that does not focus on the internal details of the program but uses external requirements

Abstraction

แปลว่า(Software Engineering) (1) the level of technical detail of some representation of software; (2) a cohesive model of data or an algorithmic procedureAction (also called Software engineering action)

B Elevation

แปลว่า(english) The bottom level of the boiler firebox where two oil guns are located. The oil guns are used if the boiler needs extra steam while on oil fire.

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.

Documents

แปลว่า(Software Engineering) deliverables produced as part of the software engineering process เอกสาร