ตัวกรองผลการค้นหา
Runoff
แปลว่า(Environmental Engineering) The water that flows overland to lakes or streams during and shortly after a precipitation event.
Bruise
แปลว่า(english) A mark transferred to the strip surface from a defective process roll. Similar to dent or punchmark.
Acid Process 2
แปลว่า(english) A steel making method using an acid refractory-lined (usually silica) furnace. Neither sulfur or phosphorus is removed.
Bake
แปลว่า(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.
Saponification
แปลว่า(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.
System
แปลว่า(Environmental Engineering) An arbitrarily defined area or volume surrounded by a boundary and possessing specific inputs, outputs, and reactions.
Elastic:
แปลว่า(english) A material or structure is said to behave elastically if it returns to its original geometry upon unloading.
Bonderized Coating
แปลว่า(english) A thin film of phosphate pretreatment applied to a steel surface (bare or zinc coated) to enhance paintability.
Dump
แปลว่า(Environmental Engineering) An illegal and uncontrolled area where wastes have been placed on or in the ground. See Landfill.
Anaerobes
แปลว่า(Environmental Engineering) A group of organisms that do not require molecular oxygen. These organisms, as well as all known life forms, require oxygen. These organisms obtain their oxygen from inorganic ions such as nitrate or sulfate or from protein.
Blank 2
แปลว่า(english) A piece of stock (also call a “slug” or “multiple”) from which a forging is to be made.
Dispersing Agent
แปลว่า(Concrete Engineering) An admixture capable of increasing the fluidity of pastes, mortars, or concretes by reduction of interparticle attraction.