ผลการค้นหา

Component reuse

แปลว่า(Software Engineering) the ability to reuse a portion of a model, source code, test case, etc.

Requirements engineering

แปลว่า(Software Engineering) the activities required to elicit, elaborate, negotiate, specify, and validate system or software requirements

Stress resultant:

แปลว่า(english) A system of forces which is statically equivalent to a stress distribution over an area.

Bright Bessemer Wire

แปลว่า(english) Stiff bright wire of hard temper. Normally wire is drawn down to size without annealing.

Bending

แปลว่า(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.

Test cases, derivation of

แปลว่า(Software Engineering) the creation of data that can be used to uncover errors in the software

Resources

แปลว่า(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.

Billet container

แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.

Connection:

แปลว่า(english) Connection is similar to the concept of support, except that connection refers to a relationship between members in a structural model. A connection restrains degrees of freedom of one member with respect to another. For each restrained degree of freedom, there is a corresponding force transferred from one member to the other; forces associated with unrestrained degrees of freedom are zero. See fixed connection and pin connection.

Busheling

แปลว่า(english) A widely traded form of steel scrap consisting of sheet clips and stampings from metal production. Bushel baskets were used to collect the material through World War II, giving rise to the term.

Stucco

แปลว่า(Concrete Engineering) A portland cement mortar material that can be applied to the surface of any building or structure to form a hard and durable covering for the exterior wails or other exterior surfaces.

Slip Form

แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.