ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(Environmental Engineering) Obtaining government (federal, state, and local) permission to construct an environmental processing, treatment, or disposal facility at a given site.
น้ำหนักบรรทุกกระทำซ้ำ
ม้านั่งที่ทำด้วยไม้ทั้งท่อน สำหรับตั้งในสวน
ตัวเปลี่ยนความร้อนในระบบเครื่องทำความเย็น, เครื่องถ่ายความร้อนในเครื่องยนต์
ด่างด้วยถูกแดดถูกฝน
น้ำบาดาลไม่มีแรงดัน : น้ำบาดาลที่เกิดอยู่ในส่วนบนสุดของเขตอิ่มน้ำ(zone of saturation)และสัมผัสกับเขตอิ่มอากาศ (zone of aeration) ทำให้น้ำบาดาลชั้นดังกล่าวไม่มีแรงดัน
(Concrete Engineering) The pressure exerted by a vapor that is calculated based upon relative humidity and temperature. The higher the humidity and higher temperature, in degrees Fahrenheit, the greater the vapor pressure exerted.
(english) The standard steel pipe used in plumbing. Heated skelp is passed continuously through welding rolls, which form the tube and squeeze the hot edges together to make a solid weld.
(เหมือง) ร่องลำธารน้ำเล็ก ๆ ที่ผ่านออกมาจากเหมือง
หนังสัตว์เป็นมันนุ่มนิ่ม ใช้ขัดถูโลหะให้ขึ้นเงา ทำขึ้นจากหนังแพะ, หนังแกะ, หนังลูกวัว
(Software Engineering) a Web engineering action that identifies business need, describes WebApp objectives, defines major features and functions, and establishes mechanisms for requirements gathering
(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.