ผลการค้นหา

Hydrogenesis

แปลว่า(Concrete Engineering) Another term for condensation. The term is especially applied to base and soil substrates under highway pavements. where the barometric pump causes the inhalation of humid air, which then condenses in those structures, causing an ever increasing moisture content and sometimes instability.

dent

แปลว่าตอกให้เป็นรอย, รอนตอก

Change management

แปลว่า(Software Engineering) a set of software engineering actions that helps ensure that changes are properly identified, controlled, and reportedChange report

heavy laden

แปลว่าถูกบรรทุกขนาดหนัก, บรรทุกเพียบ

Band Saw Steel (Wood)

แปลว่า(english) A hardened tempered bright polished high carbon cold rolled spring steel strip produced especially for use in the manufacture of band saws for sawing wood, non ferrous metals, and plastics. Usually carries some nickel and with a Rockwell value of approximately C40/45.

garden broom

แปลว่าคราด หรือไม้กวาดเหล็กที่ใช้กวาด

Accident Liability

แปลว่าความรับผิดต่ออุบัติเหตุ

independent chuck

แปลว่าจำปาสว่านของเครื่องกลึง

subsidence

แปลว่าการยุบตัวของผิวดิน

denaturants

แปลว่า(เคมี) สิ่งที่ทำให้ผิดแผกไปจากของเดิม เช่นใช้ pyridine beneene, leerosene หรืออย่างอื่นเติมใส่ลงไปในแอลกอฮอลเพื่อป้องกันมิให้ใช้ทำเป็นเครื่องดื่ม, เมรัยต่าง ๆ

Formulation

แปลว่า(Software Engineering) a Web engineering action that identifies business need, describes WebApp objectives, defines major features and functions, and establishes mechanisms for requirements gathering

Carbonation

แปลว่า(Concrete Engineering) 1) Reaction between the products of portland cement (soluble calcium hydroxides), water and carbon dioxide to produce insoluble calcium carbonate (efflorescence). 2) Soft white, chalky surface dusting of freshly placed, unhardened concrete caused by carbon dioxide from unvented heaters or gasoline powered equipment in an enclosed space. 3) Carbonated, dense, impermeable to absorption, top layer of the surface of concrete caused by surface reaction to carbon dioxide. This carbonated layer becomes denser and deeper over a period of time. 4) Reaction with carbon dioxide which produces a slight shrinkage in concrete. Improves chemical stability. Concrete masonry units during manufacturing may be deliberately exposed to carbon dioxide after reaching 80% strength to induce carbonation shrinkage to make the units more dimensionally stable. Future drying shrinkage is reduced by as much as 30%.