ผลการค้นหา

ค้นเจอ 330 รายการ

Payment for Plant and Materials in Event of Suspension

การชำระเงินค่าอุปกรณ์และวัสดุในกรณีการสั่งหยุดงานชั่วคราว

Cementitious

(Concrete Engineering) Having cement-like, cementing, or bonding type properties. Material or substance producing bonding properties or cement-like materials.

approximate weight of car

น้ำหนักประมาณของรถ

Fixed suspended solids

(Environmental Engineering) (FSS) is the matter remaining from the suspended solids analysis which will not burn at 550°C. It represents the non-filterable inorganic residue in a sample.

intensity armature

ทุ่นอาร์มาเจอร์ที่พันคอยล์หนาแน่นเพื่อต้องการความฝืดสูง

Particle-Size Distribution

(Concrete Engineering) Particle distribution of granular materials among various sizes; for concrete material normally designated as gradation. Usually expressed in terms of cumulative percentages smaller or larger than each of a series of sieve openings or percentages between certain ranges of sieve openings.

Impermeable

(Concrete Engineering) The ability of a material or product to reduce or eliminate gaseous transmissions through it's mass; measured as the rate of Water Vapor Transmission (WVT). Note: Not all materials that are waterproof are vaporproof; all materials that are vaporproof are inherently waterproof.

Water-Cement Ratio

(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.

Capillarity

(Concrete Engineering) A wick-like action whereby a liquid will migrate vertically through material, in a upward direction; as oil in a lamp travels upward through the wick,

Brinell Hardness Testing

(english) Method of determining the hardness of materials; involves impressing a hardened ball of specified diameter into the material surface at a known pressure (10-mm ball, 500-kg load for aluminum alloys). The Brinell hardness number results from calculations involving the load and the spherical area of the ball impression. Direct-reading testing are generally used for routine inspection of forgings, and as a heat treat control function.

prismatic colors

สีรุ้ง

matting

เครื่องปูลาด เช่น พรมหรือเสื่อ

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด