ผลการค้นหา

Abrasion 1

แปลว่า(english) The displacement and/or detachment of metallic particles from a surface as a consequence of being exposed to flowing solids, fluids or gases. The process of rubbing, grinding, or wearing away by friction.

Block Off

แปลว่า(english) 1) Wooden separators which are used at both the bottom of a lift and between IPM's (bundles) of a lift. 2) The act of placing 4x4s between the lifts in the piler's box.

Stiffness:

แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Amino acid

แปลว่า(Environmental Engineering) A functional group which consists of a carbon with a carboxylic acid, "-COOH" and an amine, "-NH2." These compounds are the building blocks for proteins.

Bench Lathe

แปลว่า(english) A small lathe mounted on a bench or table.

Butcher Saw Steel

แปลว่า(english) A hardened, tempered, and polished high carbon spring steel strip material (carbon content is generally higher than that of a material used for wood band saw applications) with a Rockwell value of roughly C47/49.

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Elastic Shortening

แปลว่า(Concrete Engineering) The shortening of a member in pre-stressed concrete which occurs on the application of forces induced by prestressing.

depth of runoff

แปลว่าความลึกของน้ำท่า : ปริมาณน้ำท่าที่แสดงหน่วยเป็นความลึก หาได้จากปริมาณน้ำท่าทั้งหมดในลุ่มน้ำ หารด้วยพื้นที่ลุ่มน้ำ มีหน่วยเป็น มม.

fatigue of material

แปลว่าความล้าในวัตถุ, คือความทนทานในวัตถุเ เช่น โลหะที่ใช้งานหนักมาเป็นเวลานาน ย่อมจะเกิดความล้าข้นและจะเกิดผลเสียหายในที่สุด

period of commutator

แปลว่าระยะรอบหมุนของคอมมิวเตเตอร์