ผลการค้นหา

Band Wareroom

แปลว่า(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).

Blister

แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.

Maximum Size Aggregate

แปลว่า(Concrete Engineering) Aggregate whose largest particle size is present in sufficient quantity to affect the physical properties of concrete; generally designated by the sieve size on which the maximum amount permitted to be retained is 5 or 10 percent by weight.

Bridle

แปลว่า(english) A set of rolls used to maintain tension on the strip as it goes through the line.

External force:

แปลว่า(english) A surface force or body force acting on an object. External forces are sometimes called applied forces.

Scalar:

แปลว่า(english) A mathematical entity which has a numeric value but no direction (in contrast to a vector).

Strain:

แปลว่า(english) The intensity of deformation at a point in an object. See normal strain and shear strain.

Fixed support:

แปลว่า(english) In two dimensions, a fixed support restrains three degrees of freedom: two translations and one rotation.

Brazing

แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.

Black box testing

แปลว่า(Software Engineering) testing that does not focus on the internal details of the program but uses external requirements

Screen (or Sieve)

แปลว่า(Concrete Engineering) A metallic sheet or plate, woven wire cloth, or similar device, with regularly spaced openings of uniform size, mounted in a suitable frame or holder for use in separating material according to size.

Back-up Roll

แปลว่า(english) 1) Roll used as a support roll mainly for plater rolls. 2) Two rolls, one on top and one on bottom of the two work rolls which apply pressure and reduce the flexing of the work rolls.